Power Button - NOMA 043-5641-2 Instruction Manual

1. Take the spinner from the bag. Then remove the plastic nut by turning it
counter-clockwise.
2. Place the rear guard onto the head unit and make sure the handle is facing
upward.
3. Screw on the plastic nut (clockwise), securing the fan's rear guard onto the
head unit (see Fig. 5).
4. Install the fan blade onto the motor shaft. Make sure the fan blade slot fits into
the retaining pin of the motor shaft.
5. Attach the spinner to the motor shaft by turning it counter-clockwise to secure
the fan blade (see Fig. 6).
6. Mount the front guard and join both guards together using the clips (see Fig. 7).
Spinner
Tighten
Loosen
Plastic nut
Fig. 5
I. Control Panel

- POWER BUTTON

Once plugged in, pressing this button will turn the fan on, and
- WIND SPEED BUTTON
When the fan starts, pressing this key will change
the wind speed in the order of "1-2-3-4-5-6."
Tighten
Spinner
Slot
Retaining
pin
Blade
Fig. 6
Clips
Fig. 7
Timer Wind Mode
Wind Speed Oscillation
TOUCH KEY
5
ON / OFF