Advertisement
Safety information
If the appliance is left empty for long periods of time switch off,
defrost, clean, dry and leave the door open to prevent mould
developing within the appliance.
The refrigerating appliance is not intended to be used as a
built-in appliance unless specifically shown as such into its
instruction manual.
The drawers, baskets and shelves should be kept in their current
position unless otherwise specified in this document.
Care and cleaning
Before maintenance, switch off the appliance and
disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects.
Do not use sharp objects to remove frost from the
appliance. Use a plastic scraper.
Regularly examine the drain in the refrigerator for
defrosted water. If necessary, clean the drain. If the drain is
blocked, water will collect in the bottom of the appliance.
Installation
Important!
For electrical connection carefully follow the
instructions given in specific paragraphs.
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you bought it. In that case
retain packing.
It is advisable to wait at least four hours before connecting
the appliance to allow the oil to flow back in the compressor.
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the spacers of the product should be against
a wall to avoid touching or catching warm parts (compressor,
con-denser) to prevent possible burn.
1) If there is a freezer compartment.
2) If there is a fresh-food storage
compartment.
1 )
2 )
8
Advertisement
