Hood Lamp; Carbon Filter (Usage Without A Flue); Troubleshooting - Beko BHCA96641BBHS User Manual

Hide thumbs Also See for BHCA96641BBHS:
Table of Contents

Advertisement

c. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.

5.3 Hood Lamp

In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without a
flue, you should replace your carbon filters
every 4 months in normal use. You can
obtain the carbon filter from Authorized
Services.
• The carbon filter should never be washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.

6 Troubleshooting

If the problem persists after following the in-
structions in this section, contact your
vendor or an Authorized Service. Never try to
repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
Removing carbon filters
a. Open the glass cover of the hood and re-
move the aluminium filter.
b. Unscrew the carbon filters on the right
and left of the motor holder.
c. Place the lug slots of your new carbon fil-
ters into the lugs on the motor holder and
turn them clockwise to snap them into
place.
d. Close the hood glass cover after installing
the aluminium filter.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
Hood light is not on.
• Hood lamp may be faulty. >>> Contact
your local dealer where you purchased
your product or the Customer Service,
and ensure that the lamp is replaced.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
EN / 17

Advertisement

Table of Contents
loading

Table of Contents