APPENDIX
Backlight Adjustment
TRAXALL LCD brightness is automa cally adjusted for op mal visibility
and ba ery life by the built-in Automa c Light Sensor (ALS). The LCD
will also "go blank" (turn off ) a er one minute of non-use. But you can
override the ALS by controlling both brightness and blanking intervals
through this menu.
Use the to access MAN LEVEL to
adjust LCD brightness to your preferred
(1–5) level.*
Values selected for change are displayed
in
red
un l confi rmed by pressing
which point values are shown in black.
Blanking delay can be set in ten-second
increments from 10–60 seconds, or
None.
* ALS levels are 1 through 4. Level 5 is
accessible only in manual mode and should
be used only when necessary (i.e., when
working under bright sunlight) as it can draw
extra ba ery current.
TRAXALL 700 SERIES USER GUIDE
, at
Page 44 of 72
SYSTEM MENU