CDI TRAXALL 770 User Manual page 21

TRACKING
OPERATION TRAXALL 700 SERIES USER GUIDE
AUTO TRIGGER mode keeps TRAXALL in a passive state un l a passage
is detected. (Note Wai ng for Trigger prompt.)
AUTO TRIGGER will record mul ple passages un l the Job folder
memory is full. (As TRAXALL has 4 GB system memory capacity, it is
unlikely you will exceed memory storage limita ons, but you may
determine available memory via the HELP menu. See pg. 16.)
MANUAL begins data logging as soon as selected. "Logging Data" will
appear in red.  begins logging.
Stop logging by cycling back to REC PASSES
and unchecking the box.
(Recording, if not manually stopped, will
con nue for three minutes before halted
by the system.)
Page 21 of 72