Bluetooth; What You Need; Pairing A Device; Select A Device - Philips 7406 Series User Manual

6

Bluetooth

6.1

What You Need

You can connect a wireless device with Bluetooth® to
this display – a wireless speaker or headphones*.
To play the display sound on a wireless speaker, you
must pair the wireless speaker with the display.
The display can only play the sound on one speaker
at a time.
Attention - Audio to Video synchronisation
Many Bluetooth speaker systems have a high, so
called, 'latency'. High latency means that the audio
lags behind the video, causing unsynchronised 'lip
sync'. Before you purchase a wireless Bluetooth
speaker system, inform yourself about the newest
models and look for a device with a low latency
rating. Ask your dealer for advice.
* Note: The Bluetooth on display may not work
properly with cable free true wireless headphones.
6.2

Pairing a Device

Position the wireless speaker within a distance of 5
meters from the display. Read the user manual of the
device for specific information on pairing and on
wireless range. Make sure the Bluetooth setting
on display is switched on.
Once a wireless speaker is paired, you can select it to
play the display sound. When a device is paired, you
do not need to pair it again unless you remove the
device.
To pair a bluetooth device with the display...
1 - Switch on the bluetooth device and place it within
range of the display.
2 - Press MENU > options > Settings > Remote
& Accessories and press OK.
3 - Follow the instructions on screen. You will pair
the device with the display and the display will store
the connection. You might need to unpair a paired
device first if the maximum number of paired devices
was reached.
4 - Press Back, repeatedly if necessary, to close the
menu.
6.3

Select a Device

To select a wireless device...
1 - Press MENU > options > Settings > Remote
& Accessories and press OK.
2 - In the list, select the wireless device and
press OK.
3 - Press Back, repeatedly if necessary, to close the
menu.
6.4

Rename a Device

To rename a wireless device...
1 - Press MENU > options > Settings > Remote
& Accessories and press OK.
2 - In the list, select the wireless device and
press OK.
3 - Select Change name and press OK.
4 - Enter a new name for the device.
5 - Press Back, repeatedly if necessary, to close the
menu.
6.5

Remove a Device

You can connect or disconnect a wireless Bluetooth
device. You can also remove a wireless Bluetooth
device. If you remove a Bluetooth device, the device
will be unpaired.
To remove or disconnect a wireless device...
1 - Press MENU > options > Settings > Remote
& Accessories and press OK.
2 - In the list, select the wireless device and
press OK.
3 - Select Unpair and press OK.
4 - Press Back, repeatedly if necessary, to close the
menu.
13