Bluetooth; What You Need; Pairing A Device; Select A Device - Philips 7408 Series User Manual

8. Bluetooth®

8.1. What You Need

You can connect a wireless device with Bluetooth® to
this TV – a wireless speaker or headphones.
To enable the TV audio on a wireless speaker, you must
pair the wireless speaker with the TV. The TV can only
play the sound on one speaker at a time.
Attention
Before you purchase a wireless Bluetooth® speaker
system, find out more about the newest models and look
for a device with a low latency rating. Ask your dealer for
advice.
Disclaimer:
Due to the transmission limitations of Bluetooth®
wireless technology, a slight sound delay might occur
when you hear audio from your Bluetooth® headphone
or Bluetooth® speakers.
When this occur, you might see the character moving his
or her mouth but there is a slight delay in spoken
dialogue accompany it – commonly known as lip Sync
error.

8.2. Pairing a Device

Position the wireless speaker within 15 feet of the TV.
Read the user manual of the device for specific
information on pairing and on wireless range. Make sure
the Bluetooth® setting on TV is switched on.
Once a wireless speaker is paired, you can select it to play
the TV sound. When a device is paired, you do not need
to pair it again unless you remove the device.
To pair a Bluetooth® device with the TV:
1 - Switch on the Bluetooth® device and place it within
range of the TV.
2 - Press Settings > Remotes & Accessories and press OK.
3 - Select Pair Accessory and press OK. Follow the
instructions on screen. You will pair the device with the
TV and the TV will store the connection. You might need
to unpair a paired device first if the maximum number of
paired devices was reached.
4 - Press Back, repeatedly if necessary, to close the menu.
Note:
Only one Bluetooth® sound output can be paired at a
time. If you would like to pair another Bluetooth®
speaker or headphones, just un-pair the current one first.

8.3. Select a Device

To select a wireless device:
1 - Press Settings > Remotes & Accessories and press OK.
2 - In the list, select the wireless device and press OK.
3 - Press Back, repeatedly if necessary, to close the menu.

8.4. Rename a Device

To rename a wireless device:
1 - Press Settings > Remotes & Accessories and press OK.
2 - In the list, select the wireless device and press OK.
3 - Select Rename and press OK.
4 - Enter a new name for the device.
5 - Press Back, repeatedly if necessary, to close the menu.

8.5. Remove a Device

You can connect or disconnect a wireless Bluetooth®
device. You can also remove a wireless Bluetooth®
device. If you remove a Bluetooth® device, the device will
be unpaired.
To remove or disconnect a wireless device:
1 - Press Settings > Remotes & Accessories and press OK.
2 - In the list, select the wireless device and press OK.
3 - Select Forget and press OK.
4 - Press Back, repeatedly if necessary, to close the menu.
19