Connect Your Android Display; Network And Internet - Philips 7406 Series User Manual

Hide thumbs Also See for 7406 Series:
Table of Contents

Advertisement

7
Connect your
Android Display
7.1

Network and Internet

Home Network
To enjoy the full capabilities of your Android Display,
your display must be connected to the Internet.
Connect the display to a home network with a high-
speed Internet connection. You can connect
your display wirelessly or wired to your network
router.
Connect to Network
Wireless Connection
What You Need
To connect the display to the Internet wirelessly, you
need a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Turn Wi-Fi On or Off
MENU > options > Settings > Network &
internet > Wi-Fi.
Make the Connection
MENU > options > Settings > Network &
internet > Wi-Fi.
1 - In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Add new
network to enter the network name yourself.
2 - Follow the on-screen instruction.
3 - A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the display's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Wired Connection
What You Need
What You Need
To connect the display to the Internet, you need a
network router with a connection to the
Internet. Use a high-speed (broadband) connection
to the Internet.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

43puh740643puh7466

Table of Contents