Disassembly Procedure For The Unit - Panasonic TX-P42X50B Service Manual

7.2.

Disassembly Procedure for the Unit

7.2.1. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
7.2.2. Remove the AC cord clamper B
1. Remove the screws (×2
clamper B.
Remove the Rear cover
7.2.3.
1. Remove the screws (×24
2. Remove the M8 caps (×4
3. Remove the Rear cover.
).
) and remove the AC cord
, ×6 , ×3
).
).
7.2.4. Remove the Key button
1. Remove the screws (×2
2. Remove the Key button.
7.2.5. Remove the PSS-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the connectors (P2 and P35).
2. Disconnect the bridge connector (A6-P6).
3. Disconnect the flexible cables (SS53 and SS55A).
4. Remove the screws (×5
the PSS-Board.
23
).
, ×1 , ×1
) and remove