Disassembly Procedure For The Unit - Panasonic TX-P42GT60B Service Manual

8.2.

Disassembly Procedure for the Unit

8.2.1. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
8.2.2. Remove the Bottom cover
1. Remove the screws (×4
cover.
8.2.3. Remove the AC cord clamper B
1. Remove the screws (×2
clamper B.
)
) and remove the Bottom
) and remove the AC cord
8.2.4. Remove the Wi-Fi module
1. Remove the screw (×1
module.
8.2.5. Remove the Bluetooth module
1. Remove the screw (×1
cover.
2. Remove the Pin guides (×2
connector.
3. Remove the Bluetooth module.
8.2.6. Remove the Rear cover
1. Remove the screws (×23
2. Remove the M8 caps (×4
3. Remove the Rear cover.
22
) and remove the Wi-Fi
) and remove the Dongle
) and disconnect the BT
, ×2
).
).