Table of Contents
Advertisement
7.2.6.
Remove the A-Board
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the connectors (A1 and A12).
3. Disconnect the bridge connector (A6-P6).
4. Disconnect the flexible cables (A20 and A30).
5. Remove the screws (×4
metal.
6. Remove the A-Board.
7.2.7.
Remove the Speakers
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the Speaker terminal.
3. Remove the screws (×2
Speakers (L, R).
) and remove the Side shield
each) and remove the
7.2.8.
Remove the SN-Board
1. Remove the flexible cables (SN21, SN22, SN23, SN24,
SN25, SN26, SN27 and SN28) connected to the SN-
Board.
2. Disconnect the connector (SN2).
3. Disconnect the flexible cable (SN20).
4. Remove the screws (×5
7.2.9.
Remove the Stand bracket
1. Remove the screws (×5
Stand brackets (L, R).
24
) and remove the SN-Board.
, ×1
) and remove the
Advertisement
Table of Contents
