Altronix NetWay3012P Installation Manual

Poe+ adapter/converter

Power over the Ethernet

NetWay3012P

PoE+ Adapter/Converter

Installation Guide

I.T.E. 43KC

More than just power.

Rev. 042109

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Table of Contents

Need help?

Do you have a question about the NetWay3012P and is the answer not in the manual?

Page 1 Power over the Ethernet NetWay3012P PoE+ Adapter/Converter Installation Guide I.T.E. 43KC More than just power. Rev. 042109 Installing Company: _______________ Service Rep. Name: __________________________________ Address: _____________________________________________ Phone #: __________________...
Page 2 (Fig. 2, pg. 3). 3. Connect structured cable from port marked [OUT] on NetWay3012P to the IP device (Fig. 1, pg. 2). 4. Connect 12VDC output from NetWay3012P terminals marked [+ 12VDC –] to the power input of the IP device (Fig.
Page 3 Typical Application: Fig. 2 NetWay3012P NetWay3012P NetWay3012P 12VDC Device 12VDC Microphone Illuminator PoE+ Device Camera PTZ or Fixed Camera NVR/Network Server Network Switch Video Monitor NetWay3012P Installation Guide - 3 -...
Page 4 Power Sourcing Equipment: NetWay3012P is compatible with the following Altronix PoE+ switches or midspans: Netway1X Single port midspan injector, 30W. Netway1D Single port midspan injector, 60W. NetWay8, NetWay16 8 or 16 port midspan, 30W max per port. NetWay8M, NetWay16M Managed 8 or 16 port midspan, 30W max per port.