Dräger UCF 6000 Instructions For Use Manual page 10

Description
The functional principle of the thermal imaging cameras is the same;
however, the range of functions differs. The following functions are
possible:
(1) Laser pointer

(2) Snapshot function

Displays the thermal image as a snapshot.
(3) Overheat indicator

If the "Overheat indicator" symbol flashes, the thermal imaging
camera should be switched off or removed from the hot
environment. The higher the temperature in the camera, the longer
the symbol is displayed.
Once the maximum permissible temperature inside the camera is
reached, the thermal imaging camera switches off automatically.
CAUTION
!
The image quality may be impaired, the thermal image may
be lost, or the internal components may be damaged if the
thermal imaging camera is exposed to ambient temperatures
exceeding 60 °C (140 °F) without allowing it time to cool
down.
Sufficient cooling-down time must be provided between
usage cycles in environments with high temperatures.
(4) Two times digital zoom

(5) Four times digital zoom

(6) Image and sound storage

The thermal imaging camera can record image and sound data
and approx. 1000 single images for approx. 120 minutes.
Snapshot and videos with ambient noise can then be exported to
a PC via a USB cable for further processing.
The videos are stored in a ring buffer in the thermal imaging
camera which will be overwritten after about 120 minutes if the
camera is still switched on.
10
(7) Video player

Use the video player to display the recorded videos directly on the
thermal imaging camera.
(8) Standard application mode (TI BASIC)

(9) Other application modes (TI BASIC PLUS)

(see Chapter 2.3.2 on Page 11)
The thermal imaging cameras have the following functions:
Function UCF 6000 UCF 7000
(1) X
(2) X
(3) X
(4)
(5)
(6)
(7)
(8) X
(9)
Dräger UCF 6000, UCF 7000, UCF 8000, UCF 9000
UCF 8000 UCF 9000
X X X
X X X
X X X
X X X
X
X X X
X
X X X
(X) (X) X