Speed - Paxar Monarch 9800 Series Operator's Handbook Manual

All manuals and user guides at all-guides.com
S p e e d
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5IPS and formats with parallel bar codes
print at 6.0 ips.
To change the setting, from the Main menu, select Setup, then
Supply.
1. Press l or r until you see
2. Press Enter/Pause to set the speed option. You will see the
current setting, for example:
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main menu.
4-4 Setting Supply Options
SUPPLY
l r

Speed

SPEED
l
Default