Technical Parameters - YATO YT-82780 Original Instructions Manual

PROPERTIES OF THE TOOL
The drill and screwer is a universal portable tool which does not require external power supply for do-it-yourself enthusiasts
designed to drill holes in distinct materials (e.g. wood and wood-derived materials, metals) and to screw and unscrew bolts. Its
special advantages will be appreciated by DIY enthusiasts realising assembly and fi nishing jobs. The tool has been designed
solely for domestic work and must not be used professionally, i.e. in workshops and for remunerable jobs. A correct, reliable and
safe functioning of the electric tool depends on its proper use, so:
Before you proceed to operate the device, read the manual thoroughly and keep it.
The supplier will not be held responsible for any damage resulting from the safety regulations and the recommendations indicated
hereby not being observed.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. Together with the product there are provided: the recharge-
able battery and charging station (charger).
Attention! Products with catalog numbers: YT-82781, YT-82783 have not been equipped with a rechargeable battery and charging
station.

TECHNICAL PARAMETERS

Parameter
Catalog number
Operating voltage
Speed (idle)
Maximum torque
Noise level
- accustic pressure LpA ± KpA
- accustic power LwA ± KwA
Degree of protection
Insulation class
Vibration level ah ± K (stroke / without stroke)
Weight
Tool handle
Maximum diameter of drilling
- in wood
- in concrete
- in steel
Type of the battery
Capacity of the battery*
Charger*
Input voltage
Mains frequency
Rated power
Output voltage
Input current
Time of charging**
* only for models equipped with battery and charger
* * charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
O R I G I N A L
GB
Unit
YT-82780, YT-82781
[V] 18 DC
[min -1 ] 0 - 440 / 0 - 1650
[Nm] 40
[dB] 71.0 ± 3.0
[dB] 82.0 ± 3.0
IP20
III
[m/s 2 ] - / 3.0 ± 1.5
[kg] 1.2
[mm] 1.5 - 13
[mm] 25
[mm] -
[mm] 10
Li-Ion
[Ah] 2
[V~] 220 - 240
[Hz] 50 / 60
[W] 60
[V] 21 DC
[A] 2.4
[h] 1
I N S T R U C T I O N S
Value
YT-82782, YT-82783 YT-82784
18 DC
0 - 440 / 0 - 1650 0 - 440 / 0 - 1650
40
71.0 ± 3.0 71.0 ± 3.0
82.0 ± 3.0 82.0 ± 3.0
IP20
III
- / 3.0 ± 1.5 - / 3.0 ± 1.5
1.2
1.5 - 13 1.5 - 13
25
-
10
Li-Ion
2
220 - 240 220 - 240
50 / 60
60
21 DC
2.4
1
18 DC
40
IP20
III
1.2
25
-
10
Li-Ion
3
50 / 60
60
21 DC
2.4
1,5
13