Table of Contents
Advertisement
761-082
1
760-027
2
763-129a
Connection
Alternating Current (AC)
WARNING
Be sure any electric devices are turned off before
plugging them in.
NOTICE
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
1. Start the engine.
2. Plug in to the AC receptacle.
3. Make sure the AC pilot light (green) is on.
(green)
1 AC pilot light
4. Turn the economy control switch to "I" (ON) and
turn on any electric devices.
2 "I" (ON)
TIP
The economy control switch must be turned to "3"
(OFF) when using electric devices that require a large
starting current, such as a compressor or a submers-
ible pump.
– 23 –
Advertisement
Table of Contents
