Traceable 90000-39 Operating Instructions

OPERATING INSTRUCTIONS
Normal display shows inside and outside temp in 1/10
degree.
1. One point temp control
— Slide switch to temp "Alert" posi-
tion, press "Alert Select" to select
— Press "Hi Set" to set desired High Temp Alert.
— Press "Alert On/Off" to turn on the High Temp Alert.
the sensed temp is higher than the set temp.
— Slide switch to temp "Alert" position, press "Alert
— Press "Lo set" to set desired Low
Temp Alert.
— Press "Alert On/Off" to turn on the
temp is lower than the set temp.
1.800.561.8187
FITTING THE OUTSIDE SENSOR: LOCATE OUTSIDE
SENSOR AWAY FROM DIRECT SUNLIGHT AND
HEAVY SATURATION.
2. Two point temp control
a. Inside Temp Alert "
— Slide switch to temp "Alert" posi-
tion, press "Alert Select" to select
Inside Temp Alert " " mode.
— Press "Hi set" to set the desired upper temp alert
— Press "Lo set" to set the desired lower temp alert
— Press "Alert on/off" to turn, on the Inside Temp Alert.
the sensed temp is within the set temp.
b. Outside Temp Alert "
— Slide switch to temp "Alert" posi-
tion, press "Alert select" to select
Outside Temp Alert " " mode.
— Press "Hi set" to set the desired
— Press "Lo set" to set the desired lower temp alert
— Press "Alert on/oft" to turn on the Outside Temp Alert.
the sensed temp is outside the set temp.
www.
temp alert.
Press "Alert on/off" in temp "Alert" position, "Alert"
BATTERY REPLACEMENT:
• 1 Pc "AAA" or "UM4" battery
• Insert the battery as direction indicated.
to indicated direction.
information@itm.com
.com
EASY MOUNTING OF BRACKET ON WALL BY:
— Double-sided tape or
— Screws