Traceable 98767-45 Instructions

Traceable 98767-45 Instructions

Infrared thermometer gun

Advertisement

Quick Links

ALL OPERATIONAL DIFFICULTIES

If this thermometer does not function
properly for any reason, replace the
batteries with new high quality batteries
(see Battery Replacement section). Low
battery power can occasionally cause
any number of "apparent" operational
with new fresh batteries will solve most
Find Quality Products Online at:

BATTERY REPLACEMENT

Erratic readings, faint readings, no display,
or
appearing on the display are all
indications that the batteries must be
replaced. Open the battery compartment
by sliding the battery cover in the direction
indicated by the arrow and then lift the
battery cover. Remove the exhausted
batteries and replace them with two (2)
new AAA alkaline batteries. Make certain
to install the new batteries in the directions
indicated in the battery compartment.
Close the battery cover.
GlobalTestSupply
www.
THERMOMETER
INSTRUCTIONS
.com
sales@GlobalTestSupply.com
INFRARED
GUN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 98767-45 and is the answer not in the manual?

Questions and answers

Summary of Contents for Traceable 98767-45

  • Page 1 ALL OPERATIONAL DIFFICULTIES BATTERY REPLACEMENT If this thermometer does not function Erratic readings, faint readings, no display, properly for any reason, replace the appearing on the display are all batteries with new high quality batteries indications that the batteries must be INFRARED (see Battery Replacement section).
  • Page 2 SPECIFICATIONS SELECTING UNITS OF MEASURE DISTANCE SPOT/RATIO DISPLAY MESSAGES Range: –76 to 932°F / –60 to 500°C Each press of the °C/°F button will toggle There are other factors that may affect “Er2” will appear on the display when Resolution: 0.1° (-9.9 to 199.9) between °C and °F.

Table of Contents