Download Print this page

Rockler 53648 Instructions

Drill press fence

Congratulations on the purchase of your Rockler Drill Press Fence! Mount it to a custom shop-built

table (see suggested plan inside) for increased accuracy and repeatability, as well as enhanced dust

collection. For safe and effective operation, please read these instructions fully before use.

Drill Press Fence

Instructions

Table of Contents

Need help?

Do you have a question about the 53648 and is the answer not in the manual?

Page 1 Drill Press Fence Instructions Congratulations on the purchase of your Rockler Drill Press Fence! Mount it to a custom shop-built table (see suggested plan inside) for increased accuracy and repeatability, as well as enhanced dust collection. For safe and effective operation, please read these instructions fully before use.
Page 2 PARTS LIST - DRILL PRESS FENCE Quantity 1 Aluminum Fence 2 12" Adjustable MDF Fence Face 3 Dust Port 4 4-Star Fence Hold-Down Knob 5 1" Round Knob 6 5/16"-18 x 1" T-Bolt 7 5/16"-18 x 2 ⁄ " Fence Mounting T-Bolt ⁄...
Page 3 Method 2 - Install 5/16"-18 Screw-On Tee Nuts (68379, sold separately) on the underside of your shop-built table Check Rockler.com for updates. If you have further questions, please and use Rockler Hold-Down Clamps (35283, sold contact our Technical Support Department at 1-800-260-9663 separately) to secure.
Page 4 9. Remove all jewelry, secure loose clothing and tie up 2. Before using the Rockler Drill Press Fence read, long hair before using this tool. understand and follow all instructions and safety information provided.