Summary of Contents for Rockler Edge Banding Machine
- Page 1 Edge Banding Machine Instructions Effective August 2019 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your product.
-
Page 2: General Safety Warnings
This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Edge Banding Machine: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE. -
Page 3: Important Safety Instructions
PRODUCT SPECIFIC SAFETY WARNINGS IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed, including the following: THIS PRODUCT COMES WITH TWO INSTRUCTION MANUALS: ONE FOR THE HEAT GUN AND ONE FOR THE EDGE BANDER READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) Failure to understand and follow all safety warnings and instructions could result in fire, electrical shock or serious injury. - Page 4 PRODUCT SPECIFIC SAFETY WARNINGS CONTINUED > MAINTAIN TOOLS WITH CARE. Keep tools sharp and > CHECK DAMAGED PARTS. Before further use of the clean for best and safest performance. Follow instructions tool, a guard or other part that is damaged should be for lubricating and changing accessories.
- Page 5 Heat Shields Heat Gun Nozzle PARTS LIST Quantity Outrigger Support M6 x 10 Hex Socket Cap Screw Washer Table Assembly M8 Cap Screw M8 Hex Nut Outrigger Post Hex Wrench...
- Page 6 Assembly/Setup > NO ADJUSTMENT SHOULD BE MADE UNTIL THE TOOL HAS BEEN STOPPED. Make sure that the heat gun is turned off and unplugged before setting up or making any adjustments. Use ONLY with wood or plastic edge-banding materials that are backed with a hot-melt glue.
-
Page 7: Operation
Operation > Read and understand the enclosed Steinel manual that relates to model HG 2220 E for additional safety and use information. > DON’T USE IN A DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations or expose them to rain. Do NOT use near flammable liquids or materials. Keep work area well-lighted. -
Page 8: Maintenance & Troubleshooting
Fig. 9. 8. Shut off the heat gun and allow it to cool properly before storing the Edge Banding Machine. If you do not plan to use the machine for a while, it is best to unplug the heat gun from its power source.