Table of Contents
Advertisement
MODE OF OPERATION
Water-fed fan heaters are designed to provide heating in winter and ventilation in summer. They are ideal
for indoor areas such as shops, workshops and factories.
Heating:
The hot water produced by units such as the boiler or the heat pump in winter mode (not supplied), runs
through one of the water-air exchangers which is brushed by an air flow generated by an electric axial
helical fan running at three different speeds thanks to the accessory "variable speed switch with
SUMMER/WINTER mode" (accessory on request). As the air flows through the exchanger it absorbs the heat
contained in the coil and the air temperature increases.
Summer ventilation
During the summer the fan can be run on its own to provide ventilation.
GENERAL CONSTRUCTION CHARACTERISTICS
Cover
The cover of the device is made of galvanized, pre-painted metal or stainless steel.
The cover features a modern and attractive aesthetic line. The geometry adopted gives the heater maximum
compactness and versatility.
Water-air exchanger
Made of a high-efficiency copper battery with aluminium fins. Water connection couplings have a manual
bleed valve.
Helical fan
It consists of an axial helical electric fan with high performance and low noise, and a safety grid.
The unit is sent in a single case and includes:
WATER-FED FAN HEATER
PLASTIC BAG (A) containing:
Instruction Manual;
Warranty Certificate;
Spare Parts catalogue;
Label with barcode;
Do not disperse the parts of the packaging in the environment, or leave them within the reach of children, as
they are potentially dangerous.
The booklet is an integral part of the unit and should be read carefully and kept for future reference.
DESCRIPTION OF THE UNIT
RECEIVING THE PRODUCT
6
Advertisement
Table of Contents
