Table of Contents
Advertisement
1-3. Preparations for safe driving with children in the vehicle
Child restraint system installation method (for Puerto Rico)
Child restraint system fixed with an ISOFIX lower anchorage
WARNING
■
When installing a child restraint system
Observe the following precautions. Failure to do so may result in death or serious injury.
When using the lower anchorages, be sure that there are no foreign objects around
●
the anchorages and that the seat belt is not caught behind the child restraint system.
Follow all installation instructions provided by the child restraint system manufacturer.
●
Never attach two child restraint system attachments to the same anchorage. In a
●
collision, one anchorage may not be strong enough to hold two child restraint system
attachments and may break. If the lower anchorages are already in use, use the seat
belt to install a child restraint system in the center seat.
●
When securing some types of child restraint systems in rear seats, it may not be
possible to properly use the seat belts in positions next to the child restraint without
interfering with it or affecting seat belt effectiveness. Be sure your seat belt fits snugly
across your shoulder and low on your hips. If it does not, or if it interferes with the child
restraint, move to a different position. Failure to do so may result in death or serious
injury.
If the seat is adjusted, reconfirm the security of the child restraint system.
●
INFORMATION
■
When using a "i-Size MIDI"
Adjust the support leg and ISOFIX connectors as follows:
With rigid lower attachments
Lower anchorages are provided for the outboard rear seats. (Marks displaying the
location of the anchorages are attached to the seats.)
48
Lock the ISOFIX connectors where num-
1
ber 2 can be seen.
Lock the support leg where 6 holes can be
2
seen.
Advertisement
Table of Contents
