Lexus NX350 2022 Owner's Manual page 170

2-2. Driving procedures
WARNING
If the P position switch is pressed when driving at very low speeds (for example,
directly before stopping the vehicle), the vehicle may stop suddenly when the shift
position switches to P, which could lead to an accident.
In order to prevent the shift position from accidentally being changed, do not touch the
●
P position switch when not using them.
NOTICE
■
Notes regarding shift lever and P position switch operation
Avoid repeatedly operating the shift lever and P position switch in quick succession. The
system protection function may activate and it will not be temporarily possible to shift the
shift position other than P. If this happens, please wait for a while before attempting to
change the shift position again.
■
When exiting the vehicle(driver's seat only)
Check that the shift position indicator shows P and that the parking brake indicator is
illuminated before opening the door and exiting the vehicle.
When the engine switch is changed to ACC with the shift position held
in N
Performing the following operations allows the engine switch to be set to ACC
with the shift position held in N.
1 Operate the shift lever and change the shift position to N when the engine is
operating.
2 Return the shift lever to its regular position (●).
3 Operate the shift lever to N and hold it there until the buzzer sounds.
4 Press the engine switch within 5 seconds after the buzzer sounds.
The engine switch will be set to ACC with the shift position in N.
Make sure to check that the buzzer sounds and "Holding N Push P Switch When
Done" is displayed on the multi-information display.
To change to a shift position other than N, press the P position switch. The shift
●
position will be changed to P.
*2 :
To keep this state, do not operate the engine switch. If the engine switch is operated
repeatedly, the engine switch will turn off after the shift position has automatically
changed to P.
168
*2