Operations when turning left or right or changing lanes
By operating the turn signal lever, the intent of the driver can be shown as follows.
INFORMATION
●
The turn signal lights can be operated when the engine switch is in ON.
If the indicator flashes faster than usual, check that a light bulb in the front or rear turn
●
signal lights has not burned out.
1
Move the lever to position 1.
The right turn signal lights will blink.
2
Move the lever to position
The right hand signals will flash 3 times.
3
Move the lever to position
The left hand signals will flash 3 times.
4
Move the lever to position 4.
The left turn signal lights will blink.
2-2. Driving procedures
2
and release it.
3
and release it.
2
171