Table of Contents
Advertisement
Locate the AC inlet connector on the PSU and plug the AC power cable (250VAC 15A, IEC60320
C15) into the AC inlet connector.
3. Feed AC power into the system.
The PSU will immediately output 12V & 5VSB to the system with a 110V/220V, AC power
source. The PSU has a built-in 16 amperes, fast acting fuse based on the PSU maximum
capacity, which will act as a second tier system protection in case the power distribution unit's
fuse is not functioning.
4. Verify that the power supply is operating.
If connected correctly, when turned on, the LED on the PSU will light up with a solid Green
color designating normal operation.
S9300-32D Hardware Installation Guide | 25
Advertisement
Table of Contents
