Table of Contents
Advertisement
Image focus adjustment
To adjust image focus, turn the focus
adjustment knob at the top of the projector.
NeoPix
Ultra 2
Image shape adjustment
Auto correction
Enable auto keystone correction to
automatically correct the image to be
rectangular.
1
Press
to access the settings options
and go to Geometry Corrections - Auto.
Manual correction
You can manually correct keystone or distorted
images to be rectangular.
1
Press
to access the settings options
and go to Geometry Corrections - Manual.
2
In the image shape correction interface,
press OK on the remote control to switch
between horizontal and vertical correction,
then press
/
adjust image shape.
Initial setup
TV+
on the remote control to
Placement
You can install the projector in four different
configuration. Follow the guidelines below for
different projector placement.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front table
1
Place the projector on a table in front of the
projection screen. This is the most common
way to position the projector for quick
setup and portability.
2
The projector automatically adjusts for the
correct projection orientation.
If not in the correct projection orientation,
press
to access the settings options
and go to Projection Mode - Front.
Front ceiling
1
Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
9
Advertisement
Table of Contents
