Table of Contents
Advertisement
INITIAL SET-UP
CONNECT THE
DEVICE TO A PHONE
Important: Before you begin,
unplug your phone from your
home phone wall jack.
Plug your phone into the
Phone 1 Port
on the Wireless
Home Phone Base, using
your existing phone cable or
the included phone cable.
ACTIVATE DEVICE
AND PLACE A TEST CALL
After connecting your device,
call us at
(888) 213-5349
to
begin the activation process.
If you are not transferring
your home phone number,
you do not need to call
to activate.
For best results, if using
a cordless phone, place
the cordless phone base
approximately 12 inches
from the device.
To ensure your device is
working, you can place a
test call free of charge to our
test line at
(888) 460-8781.
8
12"
CALLING FEATURES
MAKING CALLS
Using a phone connected to the Wireless Home Phone Base
allows you to place and receive calls as you normally would.
The Wireless Home Phone Base supports both cordless and
corded phone dialing methods.
CALL WAITING
You will hear two tones if someone calls while you are
already on a call.
To hold the current call and accept the waiting call, press
the
Flash (Phone/Talk) key
on your phone. You can press
the Flash (Phone/Talk) key at any time to switch back and forth
between calls.
To clear the current call and accept the waiting call,
press the
Flash (Phone/Talk)
To reject (User Busy) the waiting call,
Flash (Phone/Talk)
key.
REMINDER:
You will always need to dial full 10 digit phone numbers,
even for local calls.
CALLING FEATURES
enter 1
and
key.
enter 0
and press the
9
Advertisement
Table of Contents
