convenience concepts 134001 Assembly Instructions

Royal crest 4 tier tower

Download this manual

ROYAL CREST 4 TIER TOWER

ASSEMBLY INSTRUCTIONS

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

STOP

Broken or missing parts?

Need help with assembly?

If you have any questions just call 1-800-468-6447 or email us at

parts@convenience-concepts.com

134001

Need help?

Do you have a question about the 134001 and is the answer not in the manual?

Page 1 ROYAL CREST 4 TIER TOWER 134001 ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish .
Page 2 Hardware List FOOT (4PCS) FRAME (4PCS) GLASS PANEL (4PCS) BALL END (4PCS) POLES POLES POLISHING CLOTH (1PC) SHORT (4PCS) LONG (8PCS) NON-SLIP DISK (16PCS) Anchor ( 2pcs ) ( 2pcs ) Eyelet screw Step 1 1. Make sure all bolts in feet ( and Long Poles e fully screwed in.
Page 3 Step 4 1.Place non-slip disks ( into assembly as shown to support glass shelf. Step 5 1. Retighten all poles, legs, feet, and ball ends. 2. Using a slight angle, carefully insert glass panels ( E ) into unit. Step 6 1.Drill holes slightly smaller than anchors into drywall and gently tap anchors into holes.