Additional Functions - Bosch AutoCook MUC6 Series Instruction Manual

Note: If the pressure locking handle cannot
be opened, the appliance is not completely
depressurised. In this case, manually
depress the overpressure protection using
a thin pin until no more steam escapes
from the appliance. Then open the pressure
locking handle (M) and press the opening
button on the basic appliance.

Additional functions

The following additional functions are
available for preparation programmes with
and without steam pressure function.
Selecting a pre-configured
preparation time
The pre-configured preparation time of
the level [ средняя ] (medium) is shown
on the control panel for each preparation
programme.
The preparation time can be shortened
[ короткая ] or lengthened [ длинная ].
1. Keep pressing button E until the
desired indicator is lit. The display
changes from [ средняя ] (medium)
to [ длинная ] (longer) and then to
[ короткая ] (shorter) before returning to
[ средняя ] (medium).
The corresponding pre-configured values for
the preparation time are shown in the display.
2. Press button G to start the preparation
programme.
Setting a start time delay
The start time delay can be set for the
selected preparation programme so you
can enjoy a freshly prepared meal at a
specific time.
Note: the start time delay can only be
set for certain preparation programmes.
Additional functions
The pre-configured start time delay varies
among these preparation programmes.
1. Select the preparation programme.
2. Press button A. Button G flashes.
"00:10" flashes in the display.
Press button A repeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button A for around 2 seconds
increases the time by 30 minutes.
3. Press button G when the desired start
time delay is displayed.
The desired start time delay is shown in
the display. [ таймер ] (timer) lights up in
the display. The time until the start counts
down. Once this time has elapsed, the
preparation process starts automatically.
Notes:
■ The start time delay can be switched
off at any time by pressing button G.
The preparation programme then starts
immediately.
■ If "00:10" does not flash in the display,
a start time delay cannot be set for the
selected preparation programme.
Multiple preparation steps
Certain preparation programmes can consist
of several preparation steps. An audible
signal sounds once the next step is required.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button G flashes.
■ Open the lid of the appliance.
■ Add additional ingredients.
■ Depending on the recipe, refer to the
preparation method (e.g. with or without
steam pressure function, open lid).
X See recipe book provided
■ Start the next preparation step using
button G.
en
19