Page 1
MAP77 CanBus Vehicle Security System INSTALLATION...
Page 2
PROGRAMMABLE AND OPTIONAL FEATURES OF Mongoose MAP77 CAN bus control In some cars, MAP77 can control the vehicle electric systems via CAN bus by sending dedicated commands - it can blink the direction indicators, roll-up windows...
Page 3
PROGRAMMABLE AND OPTIONAL FEATURES OF Mongoose MAP77 CAN bus control In some cars, MAP77 can control the vehicle electric systems via CAN bus by sending dedicated commands - it can blink the direction indicators, roll-up windows...
Page 4
IMPORTANT! For some vehicles, the MAP77 VSS uses the orange wire to monitor the additional analogue status signals. Check the installation diagram for particular vehicles. In these vehicles the orange wire CANNOT be connected to ignition circuit. It MUST be connected according to installation diagram.
Page 5
Power windows MAP77 can roll-up OEM power windows after VSS arming. Windows roll-up time is configured. Setting roll-up time and enabling CAN bus control allow to roll-up windows via CAN in some cars (e.g. VW/Audi/Seat/Skoda, Mercedes, Mitsubishi vehicles). If additional RF / analogue output module is installed, roll-up time prolongs pulse length on central door locking negative control output of module.
Page 7
MAP77 VEHICLE SECURITY SYSTEM (VSS) SERVICE MODE (reading the reason of alarms, testing CAN and analogue system inputs, testing and setting sensitivity of ultrasonic motion detector, VSS has a dedicated service mode which has 5 stages: (1) reading and erasing...
Page 8
If STATUS 3 wire is drawn on car part of schematic, connect it to orange wire of MAP77. In such case the orange wire cannot be connected to ignition signal. RF module white wires are internally connected to (+) power supply of...
Page 9
SCHEMATIC V. 001/2016 BLACK WHITE WHITE BLACK ORANGE PINK/BLACK VIOLET YELLOW ORANGE BROWN BROWN BLUE LIGHT BLUE GREEN/LIGHT BLUE...
Need help?
Do you have a question about the MAP77 and is the answer not in the manual?
Questions and answers