9-Troubleshooting - Haier HW120-B14686 Series User Manual

GB
Many occuring problems could be solved by yourself without specific expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Electrical equipment should be serviced only by qualified electrical experts, because
improper repairs can cause considerable consequential damages.
▶ A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
1:25 The remaining wash cycle time will be 1 hour and 25 minutes.
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes.
6:30
Auto Automatic load detection is working; only in some programs.
The washing cycle is finished. The appliance shuts off automatically.
End
LocI - Door is closed because of high water level, high water temperature or spinning cycle.
bEEP ON The buzzer is activated.
The buzzer is deactivated.
bEEP OFF
Ion Function "Intense" is activated.
Function "Intense" is deactivated.
IoF

9-Troubleshooting

23