Advertisement
PROGRAMMED RUNTIME
☐ 3 minutes
☐ 5 minutes
☐ 10 minutes
☐ 15 minutes
☐ 25 minutes
☐ 30 minutes
☐ 35 minutes
RESERVATION MODE FOR MANUAL TRANSMISSIONS
To remote start a manual transmission vehicle, your FLRSBA must be equipped with the mSENSE accessory sold
separately and be set in "Reservation Mode" − a sequence designed to prevent your vehicle from remote
starting while the transmission is in gear.
To set your FLRSBA system in Reservation Mode, follow the programmed sequence prior to exiting the vehicle:
RESERVATION MODE SEQUENCE
1. Set the ignition to the START position. (Engine running.)
2. Press and hold the brake and the clutch pedals.
3. Set the shifter to neutral. Rock the shifter front to back, then left to right.
4. Follow the selected option:
☐ Apply the parking brake once [1x].
☐ Apply the parking brake twice [2x].
5. Release the brake and the clutch pedals.
6. Follow the selected option:
☐ Press and hold the START button on the aftermarket remote for 2.5 seconds.
☐ Press twice [2x] on the START button of the aftermarket remote.
☐ Press once [1x] on the UNLOCK button of the aftermarket remote.
☐ Go to next step.
7. Set the ignition to the OFF position. (Remove the key from the ignition, if applicable. The engine will keep running.)
8. Exit the vehicle and close all doors.
9. Follow the selected option:
☐ Wait, the engine will shut down.
☐ Wait, the engine will shut down after 10 seconds.
☐ Press and hold the START button on the aftermarket remote for 2.5 seconds.
☐ Press twice [2x] on the START button of the aftermarket remote.
☐ Press once [1x] on the LOCK button of the aftermarket remote.
10. Reservation mode is activated.
2021-10-31 © Automotive Data Solutions Inc. 3/7
FLRSBA
Advertisement
