Advertisement
1
Turn over the bracket chassis module. Remove the
S15
Mylar tape from the hooks of the bracket.
Use a Philips-head screwdriver to remove two screws
S16
for unlocking the AC power outlet.
(No.1~2 screw size=M3x8, Torque=7
2
3
kgfxcm)
±1
1
2
Remove the panel lamp cable from the hook of the
bracket. Use a Philips-head screwdriver to remove
S17
6pcs
screws for interface board and power board.
(No.1 screw size=M4x8, Torque=7
No.2~6 screw size=M3x7.5, Torque=7
5
4
Remove the power board board and interface
S18
board from the
bracket chassis module carefully,
and then
disconnect all of the cables.
U2720Q/Q2720QM
Go to contents page
kgfxcm;
±1
kgfxcm)
±1
2
3
6
1
3
Advertisement
