Advertisement
2
U2720Q/Q2720QM
Go to contents page
Use a Philips-head screwdriver to remove 1pcs
screw for unlocking the USB board unit, then release
S8
the USB board unit and put it aside.
(No.1 screw size=M3x6, Torque=4
Tear off 4pcs aluminum foil for releasing the bracket.
Use a Philips-head screwdriver to release 12 screws
S9
for unlocking the middle bezel away from the
assembled unit.
(No.1~12 screw size=M3x4, Torque=3~4kgfxcm)
12
11
3
16
5
7
8
U
se a Philips-head screwdriver to remove four
screws for unlocking the bracket chassis module
S10
with the panel module
(No.1~4 Screw size= M3x0.5x4, Torque=3~4kgfxcm)
2
0.5kgfxcm)
±
1
1
14
4
13
15
6
10
2
9
.
1
3
Disconnect the panel power cable from the two
connector of the panel module, then release the
S11
panel power cables from the hooks of the middle
bezel.
Move up the bracket, then push the earing-lock and
S12
disconnect the EDP cable away from the connector of
the panel module.
Remove the bracket chassis module and then put the
S13
bracket on a protector cushion.
Tear off the adhesive tape for releasing the function
key cable, and then r
function key board. Tear off the mylar tape, then use
S14
Philips-head screwdriver to remove 3pcs screws for
unlocking the function key board.
(No.1~3 screw size=M2x2.4, Torque=0.8~
emove the middle bezel with the
kgfxcm)
1
a
Advertisement
