How To Adjust A Settings - HANNspree HL320UPB User Manual

HOW TO ADJUST A SETTINGS

PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
TINT
COLOR TEMPERATURE
ASPECT RATIO
NOISE REDUCTION
SOUND
SOUND MODE
TREBLE
BASS
BALANCE
Adjust the overall effect of images :Standard , Dynamic , Movie ,
User.
Adjust the overall layering of images: increase the analog value
to improve the contrast and decrease the analog value to reduce
the contrast(0-100).
Adjust the overall brightness of images: increase the analog
value to improve the brightness and decrease the analog value to
reduce the brightness (0-100).
Adjust the color depth of images:
improve the depth and decrease the analog value to reduce the depth
(0-100)
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from 0 to 100.
Adjust the tint of images:
and decrease analog value to increase purple (0-100); the tint function
in only valid in TINT system.
Adjust the color temperature value of the display according to
your preference: WARM /NATURE/ COOL. .
Adjust the aspect ratio: 4:3 , 16:9 , Zoom1, Zoom 2 , Just Scsn ,
Point To Point
Set the grade of noise reduction: Middle , High, Off, Low.
Select the audio mode：Standard , Sports , Movie , User .
Adjust the treble: increase the analog value to increase the treble
and decrease the analog value to reduce the treble (0-100).
Adjust the bass: increase the analog value to increase the bass
and decrease the analog value to reduce the bass (0-100).
Adjust balance degree of right&left sound track: move the
analog value to left to increase the left volume; move the analog
value to right to increase the right volume (L50-R50). Generally,
13
increase the analog value to
increase the analog value to increase green
User's Manual