Table of Contents
Advertisement
Quick Links
User's Manual
Before operating the monitor, please read this manual thoroughly. This manual should be retained for
future reference.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
HS329PQB
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
LCD Monitor
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two
conditions﹕ (1) this device may not cause harmful interference﹔ and (2) this device must accept any
interference received, including interference that may cause undesired operations.
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulation.
【Optional, depend on selected model】
This device complies with requirement of EMC directive 2014/30/EU with regard to
Electromagnetic Compatibility, and 2014/35/EU and 93/68/EEC with regard to Low Voltage
directive.
【Optional, depend on selected model】
Socket-outlet shall be near the equipment and shall be accessible.
Bemerkung zu den Warenzeichen:
HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Marken oder eingetragene
Markenvon HDMI Licensing LLC in den Vereinigten Staaten und anderen Lä ndern.
(HSG1391)
HANNspree -Produkte beinhalten High-Definition Multimedia
Interface-(HDMI™) Technologie.
2
OSD[V6.1]
Advertisement
Table of Contents
Related Manuals for HANNspree HS329PQB
Summary of Contents for HANNspree HS329PQB
- Page 1 【Optional, depend on selected model】 Socket-outlet shall be near the equipment and shall be accessible. Bemerkung zu den Warenzeichen: HANNspree -Produkte beinhalten High-Definition Multimedia Interface-(HDMI™) Technologie. HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Marken oder eingetragene Markenvon HDMI Licensing LLC in den Vereinigten Staaten und anderen Lä ndern.
- Page 2 【Optional, depend on selected model】 Socket-outlet shall be near the equipment and shall be accessible. Trademark Notice: HANNspree products incorporate High-Definition Multimedia Interface (HDMI ) technology. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- Page 3 User’s Manual RECYCLING INFORMATION We, the HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.
-
Page 4: Table Of Contents
User’s Manual TABLE OF CONTENTS SAFETY NOTICE ....................5 PRECAUTIONS ....................5 SPECIAL NOTES ON LCD MONITORS ............. 6 BEFORE YOU OPERATE THE MONITOR ............. 7 FEATURES ...................... 7 CHECKING THE CONTENTS OF THE PACKAGE ........7 INSTALLATION INSTRUCTIONS ............... 8 POWER ...................... -
Page 5: Safety Notice
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. -
Page 6: Special Notes On Lcd Monitors
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 7: Before You Operate The Monitor
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 80cm /31.5”Wide Screen W-LED Backlight Monitor Crisp, Clear Display for Windows Ergonomic Design Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items: LCD Monitor Cables and User manual Quick Start Guide... -
Page 8: Installation Instructions
User’s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the Arm with the opening in the moniter,Install the Arm on the moniter with 2 screws. 2. Align the Arm with the opening in the base,Install the baseon the Arm with 1 screw. REMOVAL: 1. - Page 9 *Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. HANNspree bears no responsibility for improper mounting or mounting that results in accident or in jury. You can ask a...
-
Page 10: Making Connections
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s HDMI port. 2. -
Page 11: Adjusting The Viewing Angle
User’s Manual ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. ... -
Page 12: Operating Instructions
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the rear panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. -
Page 13: Front Panel Control
User’s Manual FRONT PANEL CONTROL Power Button: Press this button to switch ON/OFF of monitor’s power. Power Indicator: — Power On mode. Blue Amber — Power Saving mode. The OSD Menu and OSD Quick-Menu Symbol explanations and their functional uses are stated below. -
Page 14: How To Adjust A Settings
User’s Manual HOW TO ADJUST A SETTINGS INPUT SELECT DISPLAYPORT Select the「INPUT SELECT」option to switch signals DisplayPort, HDMI1, or HDMI2. HDMI1 HDMI2 AUDIO ADJUST Select the 「VOLUME」option to change the volume level. Enter the option and adjust the level. [This function applies only to VOLUME models with incorporated audio.] ●... - Page 15 User’s Manual COLOR ADJUST Adjust the contrast value of the display according to your CONTRAST preference. Select「CONTRAST」option to adjust the contrast value. Adjust the brightness value of the display according to your BRIGHTNESS preference. Select 「 BRIGHTNESS」 option to adjust the brightness value.
- Page 16 User’s Manual POWER INDICATOR Select the「POWER INDICATOR」option to the function On or Off. AUTO POWER OFF Select the「AUTO POWER OFF」option to the function On or Off. SLEEP Adjust the sleep mode value of the display according to your preference . ECO MODE Adjust the ECO Mode value of the display according to your preference: Standard/Optimize/Conserve.
-
Page 17: Plug And Play
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 18: Technical Support (Faq)
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION *Check if the Power Switch is in the ON position. Power LED is not on *Power Cord should be connected. *Check if the PC system is Plug & Play compatible. *Check if the Video Card is Plug &... - Page 19 68.6cm / 27” (16:9) 1920× 1080@60Hz 1920× 1080@50Hz 80cm/31.5”(16:9) 2560x1440@60Hz 2560x1440@75Hz And if you still have display problem after doing the above procedure, please visit Hanns . G support and Service Website: http://www.hannspree.eu/en/monitors Windows is a registered trademark of Microsoft Corporation.
-
Page 20: Error Message & Possible Solutions
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table. - Page 21 User’s Manual 1600×1200 @60Hz 75.000 60.000 1680× 1050 @60Hz 64.674 59.883 1920× 1080 @60Hz 67.500 60.000 1920×1200 @60Hz 74.038 59.950 1920×1440 @60Hz 90.000 60.000 2560× 1440 @60Hz 88.787 59.951 (Video mode) MODE RESOLUTION 640× 480p @60Hz 720× 480i @60Hz 720× 480p @60Hz 720×...
-
Page 22: Appendix
7.3 kg (16.09 lb) *** The above specification is subject to actual product specification and is subject to change without prior notice. NOTES: The Maximum Resolution will depends on the display card supporting. Related issue can refer to http://www.hannspree.eu/en/monitors. FAQ section.