Operating Instructions; General Instructions - HANNspree HL320UPB User Manual

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to
your personal preferences.
The power cord should be connected.

Connect the Signal cable from the monitor to the HDMI card.

Press the power button to turn on the monitor. The power indicator will light up.

Input source change
▲
Function adjustment when OSD is activated
▼
Function adjustment when OSD is activated
▼ [－]
Volume adjustment button
▲[＋]
Volume adjustment button
MENU / ENTER
Power Button
Figure.3. Control Panel Buttons
11
User's Manual