Table of Contents
Advertisement
User's Manual
HOW TO ADJUST A SETTINGS
Auto Image Adjust
Auto Image Adjust
Contrast/Brightness
Contrast
Brightness
Adv. Contrast
ECO Mode
Over Drive
Input Select
Input Select
Audio Adjust
Volume
Mute
Audio Input
The auto adjustment function is used to optimize the 「 H.
Position」 ,「V. Position」 ,「Horizontal Size」 , and「Fine Tune」 .
[For VGA Input only]
Adjust the contrast value of the display according to your
preference. Select「Contrast」option to adjust the contrast value.
Adjust the brightness value of the display according to your
preference. Select「Brightness」option to adjust the brightness
value.
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the「Adv. Contrast」option.
Allows the user to change the ECO mode. Brightness adjustment
will be disabled when ECO is active.
Allows the user to change the Over Drive strength. Improve the
quality of the motion pictures.
When Input Select is pressed, change Input signal to VGA,
HDMI, DISPLAYPORT or Auto.
Select the 「Volume」option to change the volume level. Enter
the option and adjust the level.
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
Select the「Mute」option to switch the function On or Off.
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
While transferring via the HDMI port, it is recommended to set
Audio Input to HDMI; if no sound is outputted, it is
recommended to select Audio Input as PC, and make sure the PC
audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port.
[For HDMI Input only]
14
[This function applies only to
[The
Advertisement
Table of Contents
