Pioneer CA-HM-SUB.006 Quick Start Manual

Mount the brackets and connect

all cable then insert the

aftermarket unit into the housing

and ﬁx it with screws saved before

(on the top side), use the screws

supplied for the bottom side.

Verify the proper functioning of

the system.

Remount the clima controls and

reassemble, in reverse order,

using parts saved before and

mount the facia plate provided.

This is the ﬁnal result.

CA-HM-SUB.006

SUBARU

FORESTER 2015->

Compatible with double DIN devices

All installation work must be performed by a qualiﬁed professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

Facia Plate

Mounting Brackets + Screws

Table of Contents

Need help?

Do you have a question about the CA-HM-SUB.006 and is the answer not in the manual?

Page 1 CA-HM-SUB.006 SUBARU Mount the brackets and connect all cable then insert the aftermarket unit into the housing and ﬁx it with screws saved before (on the top side), use the screws supplied for the bottom side. FORESTER 2015-> Verify the proper functioning of the system.
Page 2 Installation Manual Double DIN Kit Remove the second screw of the original OEM, inside the glove box, as shown in the Remove the clima control picture. panel. Unscrew and save the two retaining screws shown in the Remove the plastic panel by ﬁgure.