Advertisement
a.
Find your vehicles' diagnostic port (OBDII) under the dash
b.
Connect the Bypass OBDII Block (with red tag) to the OBDII port.
4.
Install the HDMI cable
OBDll Port Location
a.
Connect one end of the HDMI cable to the Bypass OBDII Block (red tag).
All OBDll ports are located under the
dash on the drivers side of the vehicle.
b.
Run the cable under the dash or weather stripping.
c.
Connect the other end of the HDMI cable to the back of the GT.
(940) 783-9915 | www.bullydog.com
9
Advertisement
