Table of Contents
Advertisement
Jetter AG
8 Programming
8.1 System Menu
INFO
8.1.1 Reserved Object IDs
Data Mask
Objects
JVM-206-K00-O21 User Manual
This chapter is intended exclusively for specialist personnel who are familiar with
ISOBUS visualizations.
The device already has a system menu for end users ex works.
The system menu is described by a customer-specific IOP file that is downloaded
together with the firmware. Jetter provides the necessary tool for linking the two
files.
The system menu contains the general functions of the terminal. You can use
them without ECU visualization. The objects of the system menu are used sepa-
rately from the ECU objects, therefore it is not necessary to check for a possible
object collision.
To open the system menu during an ECU visualization, press the HOME button.
The object description contains all system menu functions, but some functions
are not accessible for all device versions. For this reason, check the device-spe-
cific description before adjusting the system menu:
■
The RTC values are synchronized with the real-time clock if the hardware ex-
ists.
■
The UDS-related objects are accessible if the corresponding license is active
in the firmware.
■
The hardware-specific objects are only active if the necessary hardware is
available:
■
Speed channels
■
PTO speed input functions
■
Hitch position (digital)
■
Hitch position (analog)
■
Ignition output
■
Physical keys
Object ID
Description
1000
Home data mask
1001 ... 1029
Data masks for settings
1030
IOP download
1031
USB update request
1032
Update via USB
1033
Update via UDS
1035
"Input Boolean" editor
1036
"Input Number" editor
1037
„Input String" editor
1038
„Input List" editor
1040
"The IOP cache has been cleared!"
Programming | 8
20 / 32
Advertisement
Table of Contents
