Inputs/Outputs According To Iso11786:1995; Tab. 12 Digital Tractor Speed Inputs According To Iso11786:1995; Tab. 13 Pto Speed According To Iso11786:1995; Tab. 14 Hitch Position - Digital Input According To Iso11786:1995 - Jetter JVM-206-K00-O21 Translation Of The Original User Manual

Jetter AG

4.10 Inputs/outputs according to ISO11786:1995

Digital inputs for
tractor speed
PTO speed input
Hitch position (digi-
tal input)
JVM-206-K00-O21 User Manual
Within the operating voltage range, all inputs are voltage-proof and overcurrent
protected.
Category
ISO11786 - Digital inputs for wheel speed and ground speed with two modes
Abbreviation
Quantity
Pull resistor
H level
L level
Accuracy
System menu functions
Tab. 12: Digital tractor speed inputs according to ISO11786:1995
Category
ISO11786 - PTO speed
Abbreviation
Quantity
Pull resistor
H level
L level
Signal
Tab. 13: PTO speed according to ISO11786:1995
Category
ISO11786 - Hitch position (digital input)
Abbreviation
Quantity
H level
L level
Source resistance
Input resistance
Tab. 14: Hitch position - digital input according to ISO11786:1995
Description
IN_1 ... IN_2
2
4.7 KOhm
Mode 1: ≥ 3.4 V
Mode 2: ≥ 6.2 V
Mode 1: ≥ 2.5 V
Mode 2: ≥ 1.5 V
2 %
Mode and pull-up selec-
tion
Pulse/meter Calibration
Description
PTO_IN
1
4.7 KOhm
Mode 1: ≥ 3.4 V
Mode 2: ≥ 6.2 V
Mode 1: ≥ 2.5 V
Mode 2: ≥ 1.5 V
Up to 20%/80% duty cy-
cle
Description
TP_DI_IN
1
≥ 6.2 V
≥ 1.5 V
100 Ohm ± 10 Ohm
> 3 kOhm
Technical specifications | 4
Can be disabled
Default = Mode 1
13 / 32