Table of Contents
Advertisement
Accessories (Order Separately)
Sensor I/O Connectors
Applicable model
E8M
E8MS
E8MS/E80-C2
* E8M-A1 does not require the Sensor I/O Connector.
e-CON Connector for Cable Connection
Appearance
Model
XN2A-1430
Power and Output Connector
Model
E89-M5-S
Adapter
Model
Remarks
One Adapter is attached to
Y92F-37-S
the E8M-MP8 Controller.
Hard Protective Front Cover
Appearance
Y92A-40-S
Sensor and Controller Combinations
Use the Pressure Controllers in the following combinations. The E89-M3/M4 is required when using the Sensor as a single unit.
Model
E8MS-01
E8MS-10
E8MS-N0
E8MS-N1
*
E8M-A1-S
E8M-10
E8M-N0
* Connect the E8MS-N1 to a E89-M4-S Sensor I/O Connector. Do not connect it to a Controller. A Controller is not necessary.
Sensor and Controller Connection
E8M-A1-S
E8MS-@@
E8M-10/N0
E89-M3/M4-S
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Appearance
Model
E89-M3-S
E89-M4-S
E89-M4-1
Applicable wire size (mm
0.08 to 0.5
Specifications
8-pin connector with 2-m cable
48 x 48 Panel Hole Adapter
Model
Appearance
E89-M3-S
E89-M4-S
No
No
No
No
No
Yes
Yes
E8M-MP8
E89-M5-S
Specifications
4-pin connector with
*
3-m-long cable
3-pin connector with
3-m-long cable
3-conductor, 3-m-long
cable with connectors
on both ends
2
) Quantity
Minimum order unit
1
10
Quantity
1
Model
Y92F-48-S
E8M-MP8
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
Yes
No
Yes
E8MS/E8M
Unit
Remarks
Provided with one XN2A-1430 e-CON Con-
nector for Cable Connection.
1
Cannot be cut or extended.
Remarks
The E89-M3 and E89-M4 are each provid-
ed with one XN2A-1430.
E89-M5-S
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes: Required No: Not required
E89-M4-1
Yes
Yes
Yes
Yes
No
No
No
2
Advertisement
Table of Contents
