What's In The Box; Tools Required - Ecoflo CM HP Installation And Operation Manual

WHAT'S IN THE BOX?

Please check the packing slip to ensure everything has been delivered. If anything is missing, please
notify your supplier within 72 hrs of receipt.
Items you will need to complete your installation:
• Wall brackets to fix the vent pipe to the building
• A length of 100mm DWV vent pipe to connect to the air exhaust (length depends on specific
installation)
• Dektite if DWV vent pipe will penetrate the roof
You will also require the following materials for the Excess Fluid Absorption Trench (check with your
local Authority):
• 2.0m length of 100mm diameter agricultural pipe
• 2.0m x 0.5m synthetic or Hessian geotextile mat
• 0.30 cubic metre 20 mm Aggregate
• 50mm PVC pipe to connect the hose to the agricultural pipe
OR
Purchase a Drain Kit from Ecoflo.

TOOLS REQUIRED

Marker
SILICONE
Caulk Gun
Power Drill
IMCM-204.031121
Tape Measure
PVC
CEMENT
PVC Cement
Philips Drill Bit
©Ecoflo Wastewater Management Pty Ltd
Shovel
Plumb Bob
Masonry and Brad Point
Drill Bits
Hand Saw
Jigsaw
Hole Saw Drill Bit
Page 3