How To Replace The Stationary Knife - Singer 14 U44B/244B Operator's Manual

* HOW TO REPLACE THE STATIONARY
KNIFE
Danger: Before replacing the stationary knife, dis­
connect power line plug from the wall
receptacle.
* The stationary knife should be changed when it
becomes dull.
* The stationary knife can be replaced according to
the directions provided, however if there are any
difficulties experienced, consult your Singer re­
presentative to make the adjustments.
* Be sure that the power line plug is disconnected
from the electric source.
* Open the looper cover and set the movable upper
knife ® in the non-operating position (page 23).
* Loosen the stationary knife set screw (2) and
remove the stationary knife (3) .
* Place a new stationary knife in the groove of the
stationary knife holder, align the cutting edge level
with the top surface of the throat plate @.
* Replace stationary knife holder ® and tighten set
screw.
* Return the movable upper knife ® to its operat­
ing position.
41