Do you have a question about the 14U 34B/234B and is the answer not in the manual?
Questions and answers
Suzanne Saxman
April 24, 2025
What are settings for gathering fabric on serger Singer 14U34
1 comments:
Mr. Anderson
May 12, 2025
To gather fabric on the Singer 14U 34B/234B serger:
1. Use the regular throat plate. 2. Open the looper cover and loosen the differential feed adjusting lever thumb screw. 3. Slide the adjusting lever downward below the center mark to achieve gathering. 4. Tighten the thumb screw. 5. When set to the maximum gathering ratio, the stitch length dial will automatically move to setting “3” if it was set higher. 6. Reset the differential feed adjusting lever to the center mark for normal stitching.
Need help?
Do you have a question about the 14U 34B/234B and is the answer not in the manual?
Questions and answers
What are settings for gathering fabric on serger Singer 14U34
To gather fabric on the Singer 14U 34B/234B serger:
1. Use the regular throat plate.
2. Open the looper cover and loosen the differential feed adjusting lever thumb screw.
3. Slide the adjusting lever downward below the center mark to achieve gathering.
4. Tighten the thumb screw.
5. When set to the maximum gathering ratio, the stitch length dial will automatically move to setting “3” if it was set higher.
6. Reset the differential feed adjusting lever to the center mark for normal stitching.
This answer is automatically generated