Table of Contents
Advertisement
Installation
If the component is not available,
or if it is lost or fallen, position
the product so that at least 5 cm
clearance shall be left between the
rear surface of the product and the
wall of the room. The clearance at
the rear is important for efficient
operation of the product.
• Do not install the product in places
where the temperature falls below
-5°C.
3.2 Adjusting the feet
If the product stands unbalanced
after installation, adjust the feet on
the front by rotating them to the
right or left.
Refrigerator / User Guide
3.3 Electrical
connection
A
WARNING:
connections via extension
cables or multi-plugs.
B
WARNING:
cable must be replaced by the
Authorized Service Agent.
C
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
Our company shall not be liable for
•
any damages that will arise when the
product is used without grounding and
electrical connection in accordance with
the national regulations.
Power cable plug must be within easy
•
reach after installation.
Do not extension cords or cordless
•
multiple outlets between your product
and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
high temperatures may
C
flow through these areas,
resulting in hot surfaces
on the side walls. This is
normal and does not need
any servicing. Please pay
attention while touching
these areas.
9/30 EN
Do not make
Damaged power
Advertisement
Table of Contents
