Download Print this page

Watermark vito bertoni alder tapware Quick Start Manual

Qaad wall basin / bath set w/- back plate

Advertisement

Quick Links

alder tapware
PRODUCT: QAAD WALL BASIN / BATH SET W/- BACK PLATE
WARRANTY
The warranty will be void if the following occur:
Exposure to pressures that exceed 500 Kpa and or temperatures that exceed 75
AS/NZS 3500.1:2003 (Clause 3.34):
Damage to the ceramic disc cartridge from foreign matter e.g. sand, dirt, stones, thread tape, pieces of
copper or plastic tubing etc:
Inadequate flushing of system prior to usage, causing damage and/or obstructions to the product:
Damage to product surface due to installation (including adhesives and sealants):
Failure to install flow regulators and check valves from outlets including showers,
sink and vegie mixers: and
Products fitted with other devices to the outlet e.g. water filters
FREECALL: 1800 800 919
For all servicing needs, please contact CUSTOMER SERVICE on:
PHONE: 08 6217 0600
FAX: 08 6217 0699
www.aldertapware.com.au
C within a building –
o
EMAIL: customer.service@aldertapware.com.au
www.vitobertoni.com.au
NIPPLE
CUTTER
REQUIRED
Refer
V05 171017

Advertisement

loading

Summary of Contents for Watermark vito bertoni alder tapware

  • Page 1 alder tapware PRODUCT: QAAD WALL BASIN / BATH SET W/- BACK PLATE NIPPLE CUTTER REQUIRED WARRANTY The warranty will be void if the following occur: C within a building – • Exposure to pressures that exceed 500 Kpa and or temperatures that exceed 75 Refer AS/NZS 3500.1:2003 (Clause 3.34): •...
  • Page 2 INSTALLATION: QAAD WALL BASIN / BATH SET W/- BACK PLATE Diagram #1 Mark desired position of wall set and fit screw on left hand side of install plate With the DOTTED LINE on the wall mixer cover at the 12 O’CLOCK POSITION, use levelling Diagram #2 tool as shown and mark the right-hand side screw hole Fit screw on right hand side –...