System Configuration; Important Receiving Instructions - Airetool ATP III Instruction Manual

PL19-6000EN
Airetool
®
05/15/2015

System Configuration

Carefully plan your system by selecting components designed to perform the intended operation
and which will adequately perform with existing equipment.
Always check the product limitations regarding pressure ranges, load capacities and set-up
requirements. The system operating pressure must not exceed the pressure rating of the lowest
rated component in the system.
Read all CAUTIONS, WARNINGS, and INSTRUCTIONS included with or attached to each
product. Follow all safety precautions to avoid personal injury or property damage during system
operation.

IMPORTANT RECEIVING INSTRUCTIONS:

Visually inspect all components for shipping damage. If any shipping damage is found, notify
the carrier at once. Shipping damage is NOT covered under the Apex Tool Group warranty. The
carrier is responsible for all repair or replacement cost resulting from damage during shipment.
Figure 2
Page 3