Sony SA-VE812ED Operating Instructions Manual page 13

SA-WMS815 (subwoofer)
System
Speaker system
Speaker unit
Enclosure type
Continuous RMS power output
Reproduction frequency range
Inputs
LINE IN (input pin jack)
SPEAKER IN (input terminals)
Outputs
LINE OUT (output pin jack)
SPEAKER OUT (output terminals)
General
Power requirements
Canadian model:
European model:
Other models:
Power consumptions
Dimensions (w/h/d)
Mass
Supplied accessories
SA-VE815ED
Speaker stands (for the front and rear speakers) (4)
Speaker stand (for the center speaker) (1)
Screws (for the speaker stands) (10)
Washers (for the speaker stands) (10)
Plates (for the front and rear speaker stands) (4)
Speaker grilles (5)
Audio connecting cord (1)
Speaker connecting cords, 2.5 m
(8 ft 2 1 / in.) (5)
2
Speaker connecting cords, 10 m
3
(32 ft 9 / in.) (2)
4
SA-VE812ED
Speaker stands (for the front speakers) (2)
Screws (for the speaker stands) (4)
Washers (for the speaker stands) (4)
Plates (for the front speaker stands) (2)
Speaker grilles (2)
Audio connecting cord (1)
Speaker connecting cords, 2.5 m
(8 ft 2 1 / in.) (4)
2
Design and specifications are subject to change
without notice.
Active subwoofer,
magnetically shielded
Woofer: 20 cm (8 in.),
cone type
Advanced SAW type
150 W
(8 ohms, 20 - 150 Hz,
0.8 % THD)
24 Hz - 150 Hz
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
130 W
Approx. 230 395
1 5
495 mm (9 / 15 /
8 8
1
19 / in.), including front
2
grille
Approx. 17.5 kg
(38 lb 9 oz)
13 GB